Set front half of frame in box with fork facing up.

Take Surly traveler’s check apart at couplers with special Spanner wrench.

Un attach the special cables.

Remove seat post with 5mm allen key.

Put top cap back on steerer tube.

Remove stem bolts with 5mm allen key.

Remove bottom bracket with gental persuasion toward drive side from left side.

Move chain to the frame.

Remove cap with black side of BBT-9 tool.  This allows a gentle tap to remove crank arm.

Remove arm clamping bolt on left side with 5 milimeter allen key.

Removing left pedal (OPPOSITE THREADING)  It is opposite directions. (pedals have L or R)

Remove pedals (right side is (drive side) is normal threading)

Re-attach brakes (so they don’t move around)

Remove front wheel

Remove rear wheel

Drop both shifters to neutral position

Undo Brakes (Cantilever Brakes)